One name rings true for reliable and professional services when homes and businesses suffer from flooding and excess moisture. Midstate Basement Authorities is here to help guide proprietors through their renovation projects to preserve your property's current state or repair old damage. In particular, we specialize in remediating flood and moisture issues with drainage system installation.
Our contractors install affordable and effective sump pumps that help basements and crawl spaces stay dry throughout some of the wettest seasons. And with our other repair and waterproofing services, such as sublevel encapsulation, humidity control, and internal or external drainage system installation, you can always have a safe and livable sublevel. We currently offer solutions for New York, Florida, and Pennsylvania. Our service scope covers residential and commercial properties.
So if you need failsafe waterproofing solutions that are affordable and professional, give Midstate Basement Authorities a call! We'll help you determine your project's sump pump installation cost estimate 100% free of charge!
In short, sump pumps prevent flooding from occurring in a property's sublevel. A sump pump is vital to any home's flood mitigation system. These are installed in a sump pit, a cavity dug in a property's sublevel, typically in a crawl space or basement's lowest possible point. When floodwater or groundwater enters your sump pit, the sump pump kicks on, pumping water out of your home and away from its foundation.
Traditional sump pumps are electric, but some battery-operated models can kick in even if the power goes out. If this occurs and your pump still doesn't work, you may need a sump pump float switch replacement. Sump pumps are essential to protecting your home from flooding, so it's crucial to ensure that yours is properly installed and in good working order. You can always hire a professional contractor if you'd prefer a smooth sump pump installation, though we recommend that you consider sump pump installation cost factors before locking into anything.
If you've ever experienced a flooded basement, you know how much damage water can do. It can ruin your belongings and lead to mold growth and other serious problems that cost you hundreds, if not thousands, of dollars in repair. A sump pump is a standard solution that can help to protect your home from water damage. Here are a few situations when you should consider a sump pump installation on your property:
A sump pump system is worth considering if any of these apply to you. If you need clarification on your property's current flood map information, we've provided a link to FEMA's US flood map information. From here, you can check which local areas are prone to flooding, see announcements about upcoming flood hazards, and access tools or products that help with flood risk.
Sump pumps prevent flooding, making them a crucial component of any water damage deterrence system. It should be noted that having a proper pump installation is just as necessary as the pump itself. The sump pump sits in a basin, typically in the basement or crawlspace of a home. This basin collects water seeped through the foundation or walls of the property. The sump pump then pumps water from the basin and away from the property.
Choosing a correctly sized sump pump replacement or new installation for your property is just as essential as installing a backup pump in case of power outages or failure of the primary pump. Sump pumps prevent flooding for up to 24 hours, depending on the pump, so if the primary pump fails, it's vital to have a sump pump battery backup. By following these steps, you can help protect your property from flooding for years to come.
On average, traditional sump pumps can cost around $200 - $300, depending on the type of pump. An installation, on average, costs anywhere from $100 - $600; of course, this depends on the project's scope and complexity of the installation. The price will also be higher if multiple pumps, such as a primary and secondary pump, need to be installed.
Each project requires evaluation before installation to calculate a total cost, which trusted sump pump installation companies would usually disclose before starting your project. Fortunately for our clients, we do offer project evaluations that are 100% free, so you can know the general sump pump installation cost factors and pump installation costs, all before going to the bank. So call us or schedule a consultation through our online virtual estimator; we look forward to being able to help you with your next waterproofing project!
Over many years, manufacturers have innovated upon sump pump design to create newer and more versatile means of waterproofing. In addition, different iterations of sump pumps have other use cases. We've elaborated on each type below to help you make the best-formed decision on your sump pump project.
There are generally two types of sump pumps: the pedestal pump and the submersible pump.
Pedestal sump pumps have motors mounted above the sump pit, while submersible sump pumps have motors submerged in the water. Both sumps pump effectively remove water, but pedestal pumps are typically more affordable.
In addition, pedestal sump pumps are less likely to be damaged by flooding or high water levels. As a result, pedestal sump pumps are often the preferred choice for homeowners with a basement or crawl space.
A combination sump pump is, without a doubt, the best way to go if you have an unfinished basement or live in an area with a high water table. So what is a combination sump pump, one may ask? It's simply two pumps in one and does both jobs well.
The first part of the pump is called the primary pump, and its job is to keep up with daily water seepage and runoff from rain or melting snow. The secondary pump only kicks in when the water level gets dangerously high. Then, it helps prevent flooding by quickly removing any surplus water.
If you live in an area with a high water table or want to be extra safe, then a combination sump pump is the way to go. They are more expensive than your average primary or backup sump pumps but offer much better protection against flooding. You can expect to pay anywhere from $200 to $600 for a good quality combination sump pump.
A submersible sump pump is a drainage system specifically designed to remove water from an area below the water table. One typically uses this type of pump in places where the water table is high, such as basements or crawl spaces. The main advantage of a submersible sump pump installation is that there's no excavating the area around the pump.
This makes installation much less expensive than other types of pumps. In addition, submersible pumps are more efficient at removing water from an area because they are not affected by changes in the water table. However, one disadvantage of these pumps is that they can be more expensive than other types.
We use secondary sump pumps in applications where the primary pump has failed or cannot keep up with the demand. These also act as a backup in case of power outages. The main advantage of secondary sump pumps is that they provide peace of mind in knowing a backup system is in place.
Regarding pricing, secondary sump pumps are typically more expensive than primary sump pumps. They're pricier because they are designed for more demanding applications and must meet a higher standard of reliability. But when it comes to protecting your home or business from flooding, the extra cost is well worth it. A sump pump battery backup guarantees that if your property is braving a storm or flood, you still have the peace of mind of a dry sublevel, with or without an entire sump pump backup.
If you've experienced a sump pump failure, this section will explain the procedure to diagnose and repair your pump. A primary sump pump is usually electrically powered and automatically turns on and off as needed. However, if the primary sump pump needs repairs, we've outlined a few steps that you should take.
First, check to see if the problem is with the power supply. If the power is off, flip the circuit breaker or replace the fuse. If the problem is with the float switch, try manually moving it up and down to see if the pump will turn on. If neither of these solutions works, you may need to call a professional to repair or replace the pump.
It's essential to take these steps to protect your home from flooding in case of a primary sump pump loss. If you're unsure of the current state of primary or backup sump pumps, call a contractor experienced in drainage systems before attempting DIY repairs.
If you live in an area prone to flooding, you know how important it is to have a sump pump in your home or business. But what happens when your sump pump fails? Before you call a professional, you can try some DIY repair methods.
First, check to ensure you've turned on the pump is turned on and that the float switch is working. If the float switch is stuck, you may be able to free it with a wire coat hanger or other tools. Likewise, you can reset the circuit breaker if the problem is with the electrical supply.
If the pump isn't working, you can try removing it from the pit and cleaning it. Be sure to unplug the pump first! If the impeller is damaged, you can try replacing it with a new one. You can also clean and lubricate the moving parts with WD-40 or another lubricant.
If these DIY methods don't work, it's time to call in a professional. But by trying these simple repairs, you can save time and money.
A sump pump is a beneficial tool that helps to protect your basement or crawlspace from flooding. However, if your sump pump fails or isn't working correctly, you may need to replace it. Here are a few signs that you might need a new sump pump system:
Your sump pump runs continuously: If it runs more often than usual or seems "stuck" on, it could indicate that it's failing and needs replacement.
There's water in your sump pit: This is one of the most obvious signs that your pump isn't working as it should. If you notice water in your sump pit, your pump has failed and needs replacement or repair.
Your home has recently flooded: Even if your home has never flooded before, a sudden influx of water can overload and damage your sump pump. In this case, you'll need to replace your existing sump pump with a new one that can handle the increased water volume.
You have an older sump pump: Sump pumps typically have a lifespan of around ten years. If yours is growing in age, it's a good idea to start shopping for a replacement. By being proactive, you can avoid the headache of a failed sump pump when you need it most.
A sump pump is one of the essential fixtures on a property, mainly if the property's location is in an area that is prone to flooding. Because most sump pumps gain power from electricity, there is always the risk of a power outage during a severe storm. This can leave properties vulnerable to flooding if the sump pump fails. Therefore, a battery backup sump pump is essential for any home in a flood-prone area.
Unlike a traditional sump pump, a battery backup sump pump will continue to operate even during a power outage. As a result, this backup gives homeowners peace of mind knowing their home is protected even in a severe storm. In addition, battery backup sump pumps are relatively easy to install, making them well worth the investment for any homeowner in a flood-prone area.
As a leading basement waterproofing contractor in the FL, PA, and NY areas, we have the expertise to install sump pumps that keep sublevels dry all year. We are locally owned and operated and take pride in our craft. We stand behind our products and services, dedicated to providing our customers with the best possible service.
Contact us today to schedule a free consultation! Let us show how we can help you solve your basement waterproofing problems!